Solaris Garden Carousel, Инструкция по сборке

Страница: 6 / 19

Assembly
For leafy vegetables and herbs, the LED grow lights provide all the light your plants will
need. However, a sunny location is recommended if you want your plants to flower.
The Garden Carousel has a footprint of 21” x 21”, which is only 3 square feet. The 36 plant
system is 61" high, the LED stand is 71" high.
Your Garden Carousel can be placed in a corner because the plant holder rests on a
turntable. This means that you only need access to the front of the system for planting and
harvesting. It is good practice to rotate the plant holder a couple of inches at least once a
day to even out the amount of light each plant receives, making sure the rotation still puts
all the plants under the drippers.
Powering the Garden Carousel
Your system requires only one plug of a standard wall outlet because a “Y” power cable
and a 6 foot extension cord are included. One plug of the Y cord is used for the timer that
controls the LED lights and the other plug for the water pump. The pump runs
continuously, 24/7, which is essential to keep your plants alive and healthy.
⚠
Do NOT use a power strip if your closest outlet is too far to reach with the Y power
cable. Power strips, with their open sockets, are an electrical hazard near a water source.
Rather, use the provided 6 foot extension cord, if your Garden Carousel is more than a few
feet from an outlet.
Video Guides
To view video guides of the following assembly steps, visit
https://gardencarousel.com/guides
2