SolarGoesGreen SGG-Coach-FL1-C Lamp
READ AND FOLLOW ALL INSTRUCTIONS BEFORE OPERATING YOUR SOLAR LIGHT.
DESCRIPTION
The SGG-Coach-FL1-C solar lamp post light
is the industry’s cutting edge technology for your gas lamp lantern replacement or for
new installations. The lamp is completely solar powered and must be installed in a position where the solar panel will receive the
maximum amount of sun per day. The lamp will automatically illuminate at dusk and turn off at dawn or battery depletion.
The light has the Flicker Flame LEDs, and Li-ion rechargeable battery which are replaceable.
PARTS
1 Complete Flame LED lamp with integrated solar panel, 2-
Wireless remote control, 3- Li-ion Battery, and 1 mount with hardware.
*Optional Flat Mount, Optional Pole Mount, and Optional Wall Mount Kits can be ordered by contacting your retailer to purchase
optional or replacement mounting kits
.
ATTENTION BEFORE INSTALLATION
In selecting lamp installation, choose a location where the unit will receive 8-10 hours of unobstructed sunlight during the day.
Any cover, tree canopy, awning or similar that shades the panel will affect the charging of the battery resulting in a shorter run
time at night. Note: locations for Wall mounted lamps should avoid roof overhangs, eaves, and North facing locations.
Avoid locations near a night time light source like a porch light or street light. If the panel receives ambient light on it at any time,
it will not allow the automatic day/night sensor to turn the light on.
The solar light needs at least 8 hours direct sun light charge for first time use.
INSTALLATION
When installing the unit, please turn switch to
I
and cover the solar panel head by hand very closely. Please note the delay of 15
seconds for the light to turn on. Then you can start to install the light as follows.
SGG-COACH-FL1-C-W
SGG-COACH-FL1-C-P
SGG-COACH-FL1-C-F
Wall Mount
Flat Post Mount
3” OD Pole Mount
SGG-COACH-99-C-W Solar Wall Mount Light
Drill 2 holes on the wall using the wall mount as a template to determine hole location and insert the plastic anchors.
Attach the lamp body onto the bracket by spinning threaded stem clockwise into wall mount.
Attach the bracket on the wall with provided screws.
SGG-COACH-99-C-P Solar Flat Mount Light
Drill 2 holes on any flat surface using the flat mount as a template to determine hole location and insert the plastic anchors.
Attach flat mount to lamp body by spinning onto threaded stem turning clockwise until seated firmly.
Attach the completed lamp to the surface using provided screws firmly.
SGG-COACH-99-C-F Solar Pole Mount Light
Note: The original package does not include pole. When you purchase pole, please select 3" O.D
Invert lamp body, placing solar top on flat surface. Remove nut from threaded stem.
Slip 3”pole mount (fitter cup) over threaded stem being sure to orientate the larger 3” opening pointing away from lamp base so
it will fit over your existing 3” pole. Using pliers and or a deep socket (not provided) thread nut back onto stem until seated firmly
