SolarEdge SMI-180 Скачать руководство пользователя страница 47

Страница: 47 / 69

RS485 Plug-in: Purchased separately, the RS485 Plug-in provides an

additional RS485 port (referred to as RS485-E) for the Commercial

Gateway for enhanced communications. The plug-in is a 3 pin

terminal block which is installed on the communication board. This

kit is provided with an installation guide, which should be reviewed

prior to connection see,

https://www.solaredge.com/sites/default/files/RS485_expansion_

kit_installation_guide.pdf

For connection instructions refer to

Creating an RS485 Bus Connection on page 51.

Wi-Fi

This communication option enables using a Wi-Fi connection for

connecting to the monitoring platform.

The Wi-Fi option requires a Wi-Fi Plug-in and an external antenna,

available from SolarEdge in a kit, which can be purchased separately and

assembled during system installation. The Wi-Fi Plug-in kit is provided

with a user manual, which should be reviewed prior to connection. Refer to

http://www.solaredge.com/sites/default/files/se_wifi_communication_solution_installation_

guide.pdf

Cellular (GSM, CDMA)

This wireless communication option (purchased separately) enables

using a cellular connection to connect one or several devices (depending

on the data plan used) to the monitoring platform.

The GSM/CDMA Plug-in is provided with a user manual, which should be

reviewed prior to connection. Refer to

https://www.solaredge.com/sites/default/files/cellular_gsm_installation_

guide.pdf

ZigBee

This option enables wireless connection, and requires a ZigBee Plug-in and an external

antenna. ZigBee connection is used for connection of one or several devices to a

SolarEdge ZigBee Gateway, for wireless communication to the SolarEdge monitoring

platform.

SMI-180 Installation Guide MAN-01-00157-1.1

Communication Options

Содержание SMI-180






































































Результаты поиска

Содержание SMI-180

Отзывы:

SolarEdge SMI-180, Руководство по установке, Страница: 47 / 69

Результаты поиска

Содержание SMI-180

Отзывы: