SolarSpeeder 1.1 Parts & Materials List
We
strongly
suggest you inventory the parts in your kit to make sure you have all the
parts listed under the sections ‘Mechanical Parts’ and ‘Electronic Parts’. Check off
each box as you locate them. If anything is missing, contact Solarbotics Ltd. for
replacement parts information.
Mechanical Parts
(1) SolarSpeeder 1.1Printed Circuit Board (PCB)
(1) High-efficiency Coreless Motor
(1) Motor Mounting Clip
(3) Rubber Wheels on Nylon Hubs
(1) 43mm long 1.40mm diameter (1.7" long, 0.055" diameter) Steel Rod
(2) Black Plastic Wheel Retainers
Electronic Parts
(1) 0.33F 2.5V Gold Capacitor
(1) 3904 Transistor
(1) 3906 Transistor
(1) 1381 Voltage Trigger
(1)
2.2k
?
Resistor (colour bands Red/Red/Red/Gold)
(1) SC2433 24x33mm 2.7V Solarcell
(1) Pair Solarcell wires
(1) 25mm (1") length 18 Gauge wire
Tools Required
A Soldering Iron
A pair of Needle-nose pliers
Side-cutters or strong Scissors
File and/or Sandpaper
Glue, Rubber Cement, or Hot-Glue (or Superglue, if you’re
very
careful)
Safety Glasses - VERY important when clipping and snipping!
Disclaimer of Liability (i.e.: stuff to keep the Lawyer happy)
Solarbotics Ltd. is not responsible for any special, incidental, or consequential damages resulting
from any breach of warranty, or under any legal theory, including lost profits, downtime, good-
will, damage to or replacement of equipment or property, and any costs or recovering of any
material or goods associated with the assembly or use of this product. Solarbotics reserves the
right to make substitutions and changes to this product without prior notice.
In other words - be careful! We will help you any way we can to assure the successful completion
of your kit, but can’t be responsible for putting band-aids on any burns and other ouchies you
get while soldering, clipping, snipping, etc., etc...
1