18
Settings manual
When the controller is turned on for the first time the display shows the logo and the program
version. With turning the button select the desired language and confirm it with pressing the
button for 2 seconds.
Heating controllers PROMATIC D10 and D20 are equipped with an innovative procedure to
set up the controller in three easy steps.
STEP 1
In this step the hydraulic scheme is selected and confirmed with pressing the button for 2
seconds. By some hydraulic schemes you also can select floor or radiator heating mode.
With the buttons on the controller you should set up the minimal boiler temperature and the
heating curve steepness for the direct and (or) mixing heating circuits (button 3, 4 and 4 on
pages 4 and 5).
THREE STEP SETUP
STEP 2
STEP 3
2 s
2 s
SETTINGS MANUAL
O3060008
stran 18
torek, 15. julij 2008 07:51
Standardizirana barva 1
