USER MANUAL
******The led light source is non-user replaceable******
1. Set lighting mode FIRST, THEN set lighting times as (4h, 6h or 12 hours), otherwise, time will not be activated.
2. Motion sensor will be not functional when you set the different brightness level (25%, 50%, 75% or 100%) .
3. The two motion sensor programs are default set and cannot be changed. but the lighting time can be changed as 4H 6H and 12H
4. The light will blink twice when it receives the signal successfully from the remote.
Match operation is to link the light and
remote into one same group, this
allows you to use one remote to control
multi solar lights without interfering
same floodlights within a short
distance.
The remote will control the solar flood
light if you do not do match operation.
What is “match”?
Press and hold the button
MATCH , be ready to pair
the light and remote
Press the light button ON.
and then the light will
blink once. then matching
PROBLEM
POSITION
HOW TO SOLVE
Light is off
Short working time
Switch is off
No direct sun
Much cloudy or rainy days
Push on the switch
Move light to sunshine place
Work again when sun comes
Debris on solar panel
Installation location
Cloudy or very rainy
Adjust location
Clean solar panel
Work again when sun comes
Battery life is expried
Remote setting is wrong
Replace the battery in remote
Press the longer time button.
2-PRO
4-PRO
6-PRO/8-PRO
MADE IN CHINA
Materials in Package
01 : Solar flood light ( 1pc )
02 : Solar Panel ( 1pc )
03 : Remote control ( 1pc )
04 : Expansion screw ( 4pcs )
05 : 4.5m Adaptor cable (1pc) 06 : 2 Brackets + 4 M4*10 screws07 : AAA Battery ( 2pcs )
08 : User manual ( 1pc )
REMARK
COMMON TROUBLESHOOT
BEFORE USE
1
2
