Solar Storm SS48ST, Инструкция по эксплуатации

Страница: 6 / 24

Solar Storm Tanning Booth Location Requirements
Make sure the room is well ventilated. Air from the room is used to cool your tanning booth, which
helps to ensure years of trouble free performance. Poor ventilation may cause the unit to overheat
and cause discomfort to the user as well. Place your tanning booth no closer than one foot from any
wall. Be sure that curtains, drapes, and other room furniture is not obstructing the airflow into the
end caps of the booth or out of the fan openings. Due to the nature of the booth, it is best to place it
in a corner, allowing enough room for the door to swing open.
Unpacking Instructions
Your tanning booth comes in three cardboard cartons: two for the stationary sections and one
for the door section.
Remove the three sections from the plastic bags. The door box contains the hardware box.
Inspect all items thoroughly for any visible damage. Report any such damage to your
Solar Storm Authorized Dealer immediately.
BOOTH ASSEMBLY INSTRUCTIONS
Proper assembly of your tanning booth requires two people.
Tools required –
In addition to the supplied hex key, assembling the tanning booth requires an
adjustable wrench.
Parts List
Included Hardware
Item Description Quantity
A Stationary Hinge 2
B Bottom Door Hinge 1
C Top Door Hinge 1
D 5/16 x 1 ½ Allen Bolt 8
E Leveler 4
F Caster 2
G Allen Wrench 1
H Leveler Nut 4