|
19
January 2020
|
Solar Stik
®
, Inc.
Operator and Maintenance Manual for PRO-Verter RMK LAN
Before using the information below to troubleshoot, review the LED indicator guides in Table 2 and
Table 3.
Most issues arise when minor connection problems exists.
• Is the RMK connected to an “always on” internet connection?
• Is the RMK attached to a DHCP network to assign the address?
• Is the PRO-Verter powered up and properly connected to the RMK? Consult Connection
Diagram
Operating the PRO-Verter without the RMK
It may be necessary to use the PRO-Verter without the RMK. If this is the case, use an RJ11
Crossover cable to connect the REMOTE and INVERTER ports on the upper right-hand corner of
the PRO-Verter AGS Faceplate.
Note:
This cable MUST BE a “crossover” RJ11 cable for proper
function. A “straight” RJ11 cord will not work.
Figure 21. RJ11 Crossover wire connecting the REMOTE and INVERTER ports
Common Problems During Startup
