manualshive.com logo in svg

Solar Stik 19-1000010, Руководство оператора и по техническому обслуживанию, Страница: 8 / 27

Поделиться
Скачать
Solar Stik 19-1000010 Скачать руководство пользователя страница 8

Solar Venture 300W PV Array Operator and Maintenance Manual

October 2020

8 

|

  

Environmental and Handling Precautions

This equipment is ruggedized, yet there are a few things the operator can do to prevent failures and 
prolong the operational life of the product.

Water

• 

Do not operate equipment in or around standing water.

• 

Do not place cables that conduct electricity in or near 
standing water. 
 

 

Impact

The PV panels should be protected from being struck by 
hard objects. 

Dust

• 

This equipment is designed for operation in climates 
where high levels of dust or other particulates may 
exist.

• 

Clean the surface of the PV panels regularly to maintain 
maximum output. Dirty panels produce less power. 

 

Heat

• 

Heat and solar loading reduce efficiency and life 
expectancy. Shade products (except PV panels) to 
prevent the negative effects of heat. 

• 

PV panels should be placed so that they are exposed 
to adequate airflow.

Wind

It is imperative to properly secure the PV panels to 
the ground using sandbags so they do not become 
dangerous projectiles in high winds.

Содержание 19-1000010




























Отзывы:

Нет отзывов