Solar Stik 19-1000010 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 27

Solar Stik 19-1000010 Скачать руководство пользователя страница 5

|

5

October 2020

Solar Venture 300W PV Array Operator and Maintenance Manual

Your safety and the safety of others is very important. This manual provides guidance on safe
operating practices and how to achieve maximum performance from the Solar Venture 300W PV
Array. Always observe and follow all safety protocols outlined below:

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill you or
hurt you and others. All safety messages will follow the safety alert symbol and the word
“DANGER”, “WARNING”, or “CAUTION”. These words are defined as:

DANGER

Indicates a hazardous situation which, if not avoided,

will result in death or

serious injury

.

WARNING

Indicates a hazardous situation which, if not avoided,

could result in death or

serious injury

.

CAUTION

Indicates a hazardous situation which, if not avoided,

could result in minor or

moderate injury

All safety messages will identify what the potential hazard is, how to reduce the chance of injury, and
what can happen if the instructions are not followed.

Product Safety Information and Instructions

This manual contains important safety instructions that must be followed during the installation and
operation of the PV array. Read all instructions and safety information contained in this manual.

Exercise caution when handling or operating equipment. Live power may be present.

Safety Information Labels

«
...
3
4
5
6
7
...
»

Содержание 19-1000010




























Отзывы:

Нет отзывов