Solar MD SS202-05 Скачать руководство пользователя страница 11

 

Unit 23, Alternator Park 
Montague Gardens 7441 
Cape Town, South Africa

 

Solar MD (PTY) ltd.

  

E: [email protected]

  

T:  (021) 555 2181

.

 

SS202-05 INSTALLATION MANUAL v1.2

 

 

 

 

Button indication 

The Multipurpose button advanced indication functionality,  allows the user to choose between 5 different 
states. Mixed combinations are also allowed when a combination of multiple batteries with BMS-EM v10.01 are 
used. The User can change the  preferedstage by logging into his mypower24 Energy Portal and go to the 
Battery Settings. 

 
 

Illumination off 

When this state has been selected, the button serves as an on/off switch without illumination (fixed colour).

 

 

Color based on capacity 

When this state has been selected, the button shows static illumination in a color based on the state of charge. 
From RED at 0% SoC (State of Charge) to GREEN at 100% state of charge.  
 

Color based on capacity with current direction based on shading. 

When this state has been selected, the button shows  flashing illumination in a color based on the state of 
charge and flashing code based on the electrical current direction (charge / discharge). From RED  at 0% SoC 
(State of Charge) to GREEN  at 100% state of charge. The flashing code for charge goes through illumination 
interruption for 1 interval and slow illumination into the color based on the SoC for 5 intervals.  The flashing 
code for discharge represents the opposite from charge - study color for 1 interval and slow loss of color 
following illumination interruption. Solar MD users refer for both as charging / discharging waves. 

 

Fixed color with current direction based in shading

 

When this state has been selected, the button shows   illumination in a color based on the user choice and 
flashing code based on the electrical current direction (charge / discharge). The flashing code for charge goes 
through illumination interruption for 1 interval and slow illumination for 5 intervals.  The flashing code for 
discharge represents the opposite from charge - study color for 1 interval and slow loss of color following 
illumination interruption. Solar MD users refer for both as charging / discharging waves. 

 

 

 

 

10 

Содержание SS202-05




















Отзывы: