12
Solar module mounting instructions
Mono S3
▪
Mono S2
▪
M series
▪
P series
Inspect the system regularly and check
the system for:
■
Secure attachment and that all fastenings are
free of
■
corrosion
■
Safe connection, cleanliness, integrity and that
all cable connections are freed from corrosion
■
Contact resistances of the potential equalisa
-
tion
Instructions for disassembly → Shut down.
■
Disconnect the inverter(s) on the AC side from
the mains supply so that the photovoltaic sys
-
tem is without load.
■
Disconnect the photovoltaic system from the
inverter at the
■
DC-side disconnection point.
■
Make sure that voltage is no longer applied to
the system.
■
The photovoltaic system can now be disas
-
sembled. Please observe the safety instruc
-
tions.
Disposal of the modules
Disposal and recycling of solar modules are regu
-
lated by the Electrical and Electronic Equipment
Act (ElektroG), which transposes the WEEE Direc
-
tive into German law.
Please also observe country-specific regulations.
It is possible that notification is required in the res
-
pective country.
Note on liability and status of the instructions
If there are deviations from the instructions con
-
tained in this user information, SF Solar-Fabrik
GmbH & Co. KG does not accept any liability for
the use and functionality of the modules.
Since it is not possible for SF Solar-Fabrik GmbH
& Co. KG to check or monitor compliance with the
above-mentioned safety instructions as well as the
conditions and methods of installation, operation,
use and maintenance of the modules,
SF Solar-Fabrik GmbH & Co. KG also accepts no
liability for damage resulting from improper use, in
-
correct installation, operation, use or maintenance.
The text and illustrations in these mounting inst
-
ructions correspond to the technical status at the
time of printing.
Subject to change without notice.
