Solar Boiler™
Repairs and Energy Saving Tips
If any of the components of the Solar Boiler™ or Micro-Flo® solar collectors are
damaged, your local dealer or Thermo Dynamics Ltd. should be advised before any
repair is attempted.
In the case of broken glass, we recommend the use of an industrial vacuum cleaner
to remove all glass fragments from the collector and surrounding area. Cover the
collector with a sheet of plywood to protect the absorber plate until a replacement
glazing is obtained. Disconnect the wires from the photovoltaic module to the Solar
Boiler™ and contact your local dealer or Thermo Dynamics Ltd.
The Solar Boiler™ should be repaired by a qualified solar technician. In some
cases it may be necessary to disconnect the Solar Boiler™ for factory repair. Your
local solar dealer or Thermo Dynamics should be notified before you attempt dis-
connection.
Energy Saving Tips
There are several ways to increase the performance of your Solar Boiler™ and to
reduce hot water heating costs. Here are a few tips on getting the most from your
water heating system.
•
Add an insulating blanket to your electric water heater.*
•
Add an insulating blanket to your solar storage tank.*
•
Install low flow shower heads.
•
Use warm water instead of hot when washing clothes.
•
Insulate exposed hot water pipe where possible.*
•
Minimize hot water use on overcast days.
•
Use solar heated water as it is collected. If possible, postpone consumption of
hot water to mid-morning or noon on a sunny day.
•
Lower the thermostat setting of your electric water heater from 60°C (140°F) to
50°C (122°F). This should only be done by a qualified technician.
* Available from Thermo Dynamics Ltd.
Insulating tank blankets should be minimum 2” fibre-glass with foil backing. Ex-
posed water pipes should be insulated with minimum 0.5” Elastomeric Expanded
Closed Cell insulation.
19
