Solar Boiler™
Place the Solar Boiler™ module and solar
storage tank next to your auxiliary water
heater.
Remove the drain valve from the solar storage
tank. Install the bottom tank assembly. Posi-
tion the tee such that one end points toward
the Solar Boiler™.
Apply teflon tape to the hose bib and attach it
to the end of the tee that is pointing away from
the Solar Boiler™.
Connect the tee to the Solar Boiler™ module
using 3/4" copper pipe.
Connect the top outlet of the Solar Boiler™ module
to the top tank Temperature Pressure Relief Valve,
(TPRV), port using 3/4" copper pipe and the 3/4"
vented 90° elbow supplied.
Wrap teflon tape around the short nipple of the top
tank tee, and thread it into the “hot outlet” port of
the solar storage tank. This tee becomes the “hot
outlet” port of the solar storage tank.
Plumb the TPRV to a drain.
(We recommend a licensed plumber integrate the
Solar Boiler™ module and solar storage tank with
your existing domestic wate system.)
11 – Setting Up the Solar Boiler™ Module, (Bottom Connections)
12 – Setting Up the Solar Boiler™ Module, (Top Connections)
11
Cold Water Inlet
