Solahart Industries Pty Ltd
1 Alan Street, Rydalmere, NSW 2116
|
PO Box 7508, Silverwater, NSW 2128
Solahart Industries Pty Ltd ABN 45 064 945 848
Ph: 02 9684 9100
| solahart.com.au
d)
If the rails do not come with grooves, holes of a suitable diameter may need to be drilled
to allow bolts to be attached to the bars at the same locations as mentioned above.
e) Secure each clamp by attaching plain washer, spring washer, and nut, in that order.
f)
The torque for tightening the nut and bolts are recommended to be 17~23 Nm.
4.3.2 Component installation range and Mechanical load value
The specific Mechanical load value and installation scope of Solahart PV modules are shown in the
following table.
Module type
Dimension
Installation range J
Mechanical load
Solahart345V1
Solahart350V1
1692 x 1002 x 35 mm
350 ± 50 mm
+5400Pa/-2400 Pa