SOLAC VT8805, Инструкция по эксплуатации

Страница: 9 / 47

9
7. Motor shaft
8. Connecting ring
9. Safety screw
10. Oscillation
button
11. Speed regulator
12. Carry handle
13. Base
14. Base attachment screw
ASSEMBLY
1. Fit the motor shaft (7) into the base (13) (Fig. 1) and join both parts using
the base attachment screw (14) (Fig. 2)
2. Unscrew and remove the hood (2) and ring (4) from the motor shaft (7),
and also remove the shaft protector (5).
3. Fit the rear grille (6) over the shaft (7) so that the projections on the motor
shaft coincide with the orifices on the rear grille (6) (Fig. 3). Fix the grille
to the shaft using the ring (4), tightening it in a clockwise direction.
4. Insert the blades (3) and lock them in place by turning the hood (2) anti-
clockwise (Fig. 4). Check that they turn correctly.
5. Mount the front grille (1) using the guide on the connecting ring (8). You
will hear a “click”. Proceed to tighten the safety screw (9). (Fig. 5)
OPERATING INSTRUCTIONS
• Turn the regulator control to select the desired speed. The VT8805 model
has 2 speed settings, while the VT8810 and VT8815 models have 3 speed
settings.
• The fan can be turned off by turning the regulator control to position 0.
• The fan will oscillate automatically when the button (10) is pressed; pull the
oscillation button (10) gently to stop the oscillation. To resume the oscillat-
ing function, simply press this button again.
• The fan may also be inclined at an angle of 45º to the vertical. Adjust this
inclination pressing gently on the upper part of the motor shaft (7), forwards
or backwards.
CLEANING AND MAINTENANCE
• Your appliance must be disconnected from the mains before any cleaning
operation is performed.
Ventilador VT8805-8810-8815 9 5/1/06, 09:33:04