M
N
Then push the front cover over the LEDs.
Align the LEDs if necessary!
Before attaching the wooden front, double-
check that all the protruding wires have been
shortened to 2 mm.
Mount the front cover.
Apply a little wood glue to the areas
marked in red and then then press the
hourglass onto the the base plate.
Then wait approx. 10 minutes until the
glue has glue has dried.
Glue the hourglass to the base plate.
Gluing surface:
10 minutes
Pay attention to the
alignment of the
base plate!
ü
