B30-006
EN
C000000
These instructions describe the correct operating method to ensure prolonged service life. Please read
and completely understand these instructions before operating your solar light.
Keep these instructions for future reference.
INTRODUCTION
Using LED (Light Emitting Diode) technology and powered by the sun, this solar light is ideal for
highlighting garden contours,pathways and driveways. During the day, the solar panel on top of the
light charge the battery inside. At dusk, the solar light will turn on automatically using the stored
energy from the sun.
The unique High /Low switch is designed to maximise brightness during summer, and maximise
operating time during winter and over extended cloudy periods.
When the switch is in the High position, the brightness can reach up to 60 lumens and will last up to
6 hours each night when the battery is fully charged.
In the Low position, the brightness can reach up to 30 lumens and up to 8 hours working time.
POSITIONING YOUR SOLAR LIGHT
*Your solar light includes a built-in photo sensor, which detects the level of surrounding natural light
and controls when the light will automatically switch on and off. Solar light should be placed away
from other night time light sources including other solar lights, as this might keep the light from
automatically turning on at dusk.
*
S
olar light must be located in an area where the solar panel will receive a maximum amount of full,
direct sunlight every day. Solar light should be exposed to at least 8 hours of direct sunlight each day
to fully charge the battery inside.
Shady locations will not allow the battery to charge fully and will reduce the hours of night time
light.
The performance of your solar light is dependent on your geographical location, weather
conditions and seasonal lighting availability. On cloudy days and during winter,your solar light
will not receive as much direct sunlight, resulting in reduced brightness and reduced operating
time.
ASSEMBLY
This pack should come with the following.
NB:Some components may come pr-assembled
