Sokkia RADIAN IS, Руководство по эксплуатации

Страница: 48 / 74

42 RADIAN™IS
Chapter 4 Using the Radian IS
*
Note:
Receivers are intended to be used as kinematic or
static but not both at one time. Run schedules only on
Radian IS when it is being used as a static receiver (base
station). If you need to enter any data on the base station
receiver, do so in the office, using Planning software, before
you go into the field. Never communicate with a base
station receiver, using the SDR, if the receiver is set to run a
schedule. Doing so will disable the schedule.
4.5 Data Collection Fundamentals
The Radian IS receiver is an extremely versatile GPS device that
enables you to collect data several ways and to define the type
of information stored during data collection. The following
sections explain data collection.
4.5.1 Collecting Data
The most basic activity you will perform using your Radian IS
is collecting raw data. Each collection session (one
uninterrupted period of time) is stored in a single, unique file
on a data card. This file can subsequently be transferred to a PC
for post-processing and adjustment using Sokkia’s Spectrum
Survey Suite software package.
CAUTION
There is an option that will enable you to collect the data
you require, as soon as the receiver is turned on, without
having to delete the POWERUP group or create schedules.
This option is to edit the POWERUP group to collect the
data that you require instead of what was preset. Editing
configurations is for advanced users only. Refer to your
Planning Reference Manual for instructions.