manualshive.com logo in svg

Sokkia DX Series, Руководство оператора, Страница: 64 / 188

Поделиться
Скачать
Sokkia DX Series Скачать руководство пользователя страница 64

10. TARGET SIGHTING

58

2. Press 

[SRCH]

 in any Observation mode screen. 

The telescope and top half of the instrument 
rotate and target auto-search begins. When the 
target is found, the instrument sights the prism 
and stops.
  

C

Allocating the

 [SRCH] 

softkey:

 "20.6 Allocating Key Functions"

$

•  When "Search" is selected in "Search Setting" in the "Configuration" tab of <Motor configuration>,  

the function of the following softkeys will change depending on the option selected in "Srch. 
method".

C

Motor settings: "10.1 Auto Pointing Settings"

• "Turning" operation: The instrument locates the Remote Controller by detecting the laser beam 

output by the  Remote Controller, then starts Auto Pointing.

*1

: Pressing

 [TRK On]

 when "Search Setting" is set to "None" will result in one of the 

following operations being performed.
When "R.C." selected: Performs Turning operation then Auto Tracking
When G.S." selected: Performs Auto Pointing then Auto Tracking

   "Motor" 

        setting

Softkey           

         When "Search" set in "Search Setting"

When "None" set in 

"Search Setting"

"Srch method" is R.C.

"Srch method" is G.S. 

(Global Search)

[SRCH]

Performs Auto Pointing 

[MEAS]

Performs Turning 
operation then angle/
distance measurement

Performs Auto Pointing 
then angle/distance 
measurement

Performs angle and 
distance measurement

[RC]

Rotates directly in the direction of the Remote Controller then performs Auto 
Pointing

[<-RC]

Rotates in a counterclockwise direction (from the point of view of the Remote 
Controller) then performs Auto Pointing

[RC->]

Rotates in a clockwise direction (from the point of view of the Remote 
Controller) then performs Auto Pointing

[RC Cont]

Nullifies the current measurement position then continues Turning operation

[TRK On]

(Auto 
Tracking 
option only)

Performs Turning 
operation then Auto 
Tracking

Performs Auto Pointing 
then Auto Tracking

Performs Auto Tracking 

*1

Содержание DX Series





























































































































































































Отзывы:

Нет отзывов