SOHARD SH-ARC PCI Скачать руководство пользователя страница 16

SH-ARC PCI

Manual

Version 01.00

9 Limited Warranty

SoHard GmbH warrants that every product and all components are free 
from   defects   in   workmanship   and   materials   under   normal   use   and 
service. The warranty period is one year from the date of purchase. The 
warranty is limited to the original purchaser and cannot be transferred.

If   a   product   does   not   operate   as   warranted   during   the   applicable 
warranty period, SoHard GmbH shall, at its option, repair the defective 
product or component or deliver to the customer an equivalent product 
or   component.   Repaired   or   replaced   products   or   components   are 
delivered in exchange of the defective products or components with the 
option of  SoHard GmbH whether the delivered products or components 
are   new   or   as   new.   All   products   that   are   replaced   will   become   the 
property of  SoHard GmbH.
This limited warranty excludes damage due to accidents, catastrophes, 
negligence,   inadequate   use   or   changes   of   the   product   or   component 
made by the customer.
Warranty service may be obtained by delivering the defective product or 
component accompanied by a copy of the dated proof of purchase, to 
SoHard GmbH. It has to be ensured that the package is appropriate for 
safe shipment. After expiration of the warranty period (one year from the 
date of purchase) no warranty services can be obtained whatsoever.

The repaired or replaced item will be shipped to the customer. Carrier 
and terms of shipment are concern of SoHard GmbH. If there are special 
requirements   of   the   customer   in   terms   of   shipment   or   a   destination 
outside   of   Germany,   Austria,   Switzerland   and   the   eastern   european 
countries   the   shipment   will   be   carried   out   at   the   expense   of   the 
customer.

The warranty described above is the only warranty SoHard grants for ist 
products. There is no warranty, neither explicit nor implicit, that SoHard 
GmbH   products   can   be   used   commercially,   the   usability   for   specific 
applications   or  that   third   party  rights   are  not   violated.   SoHard   GmbH 
makes no warranty that the operation of a accompanying software will 
be uninterrupted and error free. SoHard GmbH shall not be responsible 
whatsoever for   damage by chance, special or intentional damage and 
costs and failures due to the use and operation of the product, covered 
by this warranty.
(Some governments don’t allow the disclaim for damage by chance or 
subsequent damage in connection with this type of product. In this case 
above limitations are void.)

page  16

Содержание SH-ARC PCI




















Отзывы: