SOGEDIS HP T2, Руководство по обслуживанию

Страница: 52 / 69

HP T2 PANEL
SERVICE MANUAL
7. 7. COMPONENT SPECIFICATIONS AND MEASUREMENTS
7.1. Motor
The dryer has an BLDC motor. In the photo
on the right, the socket on the motor are
shown to be measured by multiple counters.
It is driven with the electronic card (Driver).
Technical Features
Type: BLDC motor
Power: 18 W (Unloaded drum)
Windings: 7,9±8%
(20 °C temp.)
Motor speed : 2700 rpm (Unloaded drum)
Drum speed : 51 ± 2
Component Test

Check whether the motor cable is connected to the motor connector.

Check the connection of the capacitor cables

Measure the resistance values and check the capacitor values

Check whether it is working by connecting via the terminals 1 and 2 (Blue-White)
connection

If it is working, revolution of the drum is measured in unloaded state.
Resistance measurement of main winding1: Terminal 1 -2 is measured.
Resistance measurement of main winding2: Terminal 1 -3 is measured.
Resistance measurement of main winding3: Terminal 2 -3 is measured.