SOGEDIS HP T2, Руководство по обслуживанию

Страница: 10 / 69

HP T2 PANEL
SERVICE MANUAL
Step 3
(Knob Position
3)
Pump is on 5 sec - -
Service must pour water to
pump reservoir and check
whether water is pumped to
tank.
If water is not pumped to
water tank;
*Pump connector is taken out
Step 4
(Knob Position
4)
Motor CCW (Tumble CW)-Motor stops 10 sec - -
Service must check whether
tumble is moving to CW. If
not;
*Motor connector is taken out
*Motor might be locked
*Motor belt might be
dislocated
Step 5
(Knob Position
5)
Motor CW (Tumble CCW) -Motor stops 10 sec - -
Service must check whether
tumble is moving to CCW
*If tumble is moving to CW
again, then motor relay short
circuit CCW
Step 6
(Knob Position
6)
Check Heater NTC if heater NTC T=255 5 sec E05 -
*Heater NTC connector is
taken out or short circuit
Step 7
(Knob Position
7)
Check Door NTC if heater NTC T=255 5 sec E06 -
*Door NTC connector is taken
out or short circuit