Step 7
Install the door surrounds by
attaching the front end to the windshield
header deck hinge with the pin and circlip
and the rear end to the folding frame
assembly using the deckhinge and
thumbscrew. Place the lower tent pole ends
into the hole in the front of the bedrails.
Step 8
Unfold the canopy and place it on top of the assembled frame structure and snap it to
the windshield header. Now attach the rear snaps over and around the rear crossbar. If the
frames webbing straps are not attached loosley it is more difficult. Snap the sides down to
their corresponding snap on the bedrails. If there appears to be a dominant wrinkle it may
require moving the bedrails slightly forward or rearward.
Step 9
Attach 2 of the 5 pieces of velcro to the inside of each vertical door surrounds plastic
area so that it will mate up with the loop velcro area of the side panels front flap. You may
need to cut the self adhesive velcro to fit or you can center it vertically and wrap around top
and bottom.
1-800-810-7227
