Step 1
Join the front and rear portions of the square bedrail tubes. Attach the black plastic
parts to the bedrails using the 4- #12 screws. The parts are marked with an "A" or a "B". "A"
goes on the driver side bedrail and "B" goes on the passenger side bedrail. Remove the white
protective tape from the weatherstripping on the bottom of each bedrail.
Step 2
Place the bedrails into position on the
vehicle and align each bedrail side to side and
front to rear as shown in the photos and clamp
in place. The clamps will allow you move the
bedrails slighty later if necessary.
1-800-810-7227
