Softing PBpro ETH, Руководство пользователя

Страница: 23 / 36

Chapter 3 - PBpro ETH Adm inistration
PBpro ETH - User Guide 23
3.3.4.1 Web based configuration and firmware update
After an IP connection between PC and PBpro ETH has been set up as described in the
previous sections, you may access the PBpro ETH from your PC by means of a Web
Browser (e. g. Microsoft Internet Explorer).
Start your browser with the URL http://192.168.212.212 (factory default for Ethernet
connection) or the currently assigned IP address of the PBpro ETH respectively. The
page
System Status will be displayed. The menu bar offers four information pages, four
configuration pages and the contact page.
The configuration pages offer the following functions
Network Configuration
Device Configuration
Firmware Update
Set Password
All configuration pages require a login name and a password to execute the functions. The
login name is "config". The password is "config" by default, but may be changed.
3.3.4.2 Network configuration
The PBpro ETH is shipped with the following default IP configuration:
Login: config
Password: config
Host Name: <part number>-<serial number> (see type label)
IP Address: 192.168.212.212
Subnet Mask: 255.255.255.0
Maintenance IP Address: 192.168.212.231 (for future use only)
You may change the IP configuration according to your needs. IP address and subnet
mask must be present in any case. You may leave the host name empty. It is reserved for
future use and has no meaning in the current release. It is not necessary to configure a
default gateway, if the computer and the PBpro ETH device are connected to the same
subnet.