edgeGate - Quick Startup Guide
22
© Softing Industrial Automation GmbH
7
Declaration of the manufacturer
This device complies with the requirements of the EC directive 2004/108/EG, "Electromagnetic
Compatibility" (EMC directive). It meets the following requirements:
EN 55011
Limits and methods of measurement of radio disturbance characteristics of
industrial, scientific and medical (ISM) radio frequency equipment, group 1, class A
EN 55032
Information technology equipment; Radio disturbance characteristics; Limits and
methods of measurement, class A
EN 61000-6-4 Electromagnetic compatibility (EMC); Part 6-4: Generic standard – Emission
standard for industrial environments
EN 61000-6-2 Electromagnetic compatibility (EMC); Part 6-2: Generic standard - Immunity for
industrial environments
Note
To fulfill the EMC requirements, the other components of your installation (DC adapter,
Industrial Ethernet devices, etc.) also have to meet the EMC requirements. A shielded cable
must be used. In addition, the cable shield must be grounded properly.
CAUTION
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures!
