Softing CableMaster CM500, Руководство пользователя, Страница: 20 / 24

CableMaster 500
20
Tone Mode
The Tone Mode generates audio tones on all pairs, a selected pair or
a selected pin. These tones can be heard by using an inductive tone
tracer. The signal generated on a pair has the signal on one pin and the
complement of the signal on the other pin of the pair, yielding a nominal
10 Volts peak-to-peak across the pair.
Figure 9—Tone Setup Menu
Pressing the “OK” key toggles through cable types (Data, Video, Phone).
Pressing the “Test” key toggles Tone on and off.
Pressing “Up/Down” keys select pins used for Tone.
To change the tone, press the “Setup” key, then press the “Up/Down”
keys to change the cadence. Press the “OK” key to save the cadence
selected. The tone pattern options are Hi, Lo, HiLo1 and HiLo2. The HiLo
options are dual or warble tones of differing pattern duration.