K-Scan PC User Manual 文書番号：SFT-20070171
Page 29 of 35
４-１１
Throttle Setting
This function is to set a TPS (Throttle Position Sensor) voltage at closing point to the ECU. In
order to adjust differences of throttle body (TH/B) on a vehicle, it is possible to let the ECU to
learn the TPS voltage at the metal touch position of throttle butterfly.
Figure 19
Throttle Setting Dialog
1 TPS
Voltage
Current
Display current TPC voltage.
If the voltage is not within a normal range, it will be
displayed in red.
2 Range of permission
High
Display upper bound voltage within the normal range.
3 Range of permission
Low
Display lower bound voltage within the normal range.
4 Set to ECU button
Set the TPS voltage to the ECU.
When you clicked the button, the Message 19 will be
shown(See the
５
-
１
Message List ).
If you select ‘Yes’ button, current TPS Voltage will be set
to the ECU. If it is succeeded to set, the Message 20 will
be shown(See the
５
-
１
Message List). But if it is failed
to set, one of the Message 21-28 will be shown (See the
５
-
１
Message List).
5 [Close]
ボタン
Close this dialog.
