SoftBank 812SH s II, Инструкция

Страница: 62 / 401

2-2
2
Basic Handset Operations
See P.2-5 to initiate international calls from Japan, P.2-17 for V oice Calls from outside Japan and P.5-3 for V ideo Calls.
Initiating a Call
1
2
3
4
1
Confirm handset is on
^
Check signal strength (see P.1-9
1
).
^
Handset will not transmit when
P
,
U
,
b
or
l
appears (see P.20-4 - 20-6 ).
2
Enter a phone number
^
Include dialling code for all numbers.
3
Confirm the number and press
f
Correcting Numbers
^
Use
F
to move cursor and press
i
to
delete the digit above the cursor. Move
cursor and press
i
for 1+ seconds to
delete the digits above and after the cursor.
^
Before moving cursor, press
i
for
1+ seconds to delete the entire number and
return to Standby.
^
If you misdial, press
g
to hang up and try
again.
Busy Numbers
^
Press
g
to end the call and try again later.
4
Press
g
to end call
^
Alternatively, close handset.
Note
H ^
Do not cover Microphone while talking.
^
Avoid covering area over Internal Antenna.
^
V oice quality is affected depending on how and where handset is used.
Tip
H
^
Check Call Timers (see P.2-14 ) and Call Costs (see P.2-15 ).
^
For operations during a call (Loudspeaker, Mute, Hold, etc.), see P.2-11 - 2-12 .
^
Alternatively, enter a phone number and press
N x
to select Show My ID or Hide My ID .