SoftBank 706P, Руководство пользователя

Страница: 24 / 300

xxiii
!
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the
user's authority to operate the equipment.
Your handset is a radio transmitter and receiver. It is designed
and manufactured not to exceed the emission limits for exposure
to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
The guidelines are based on standards that were developed by
independent scientific organisations through periodic and
thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless handsets employs a unit of
measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg.The tests are performed
in positions and locations (e.g. at the ear and worn on the body)
as required by the FCC for each model.
The highest SAR value for this model handset when tested for
use at the ear is 0.768 W/kg and when worn on the body, as
described in this user guide, is 0.324 W/kg.
Body-worn Operation; This device was tested for typical body-
worn operations with the back of the handset kept 1.5 cm from
the body. To maintain compliance with FCC RF exposure
requirements, use accessories that maintain a 1.5 cm separation
distance between the user's body and the back of the handset.
The use of beltclips, holsters and similar accessories should not
contain metallic components in its assembly.
The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements, and should be
avoided. The FCC has granted an Equipment Authorisation for
this model handset with all reported SAR levels evaluated as in
compliance with the FCC RF emission guidelines. SAR
information on this model handset is on file with the FCC and
can be found under the Display Grant section of http://
www.fcc.gov/oet/fccid after searching on FCC ID UCE206001A.
Additional information on Specific Absorption Rates (SAR) can
be found on the Cellular Telecommunications & Internet
Association (CTIA) website at http://www.phonefacts.net.
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines were
developed by the independent scientific organization ICNIRP and
include safety margins designed to assure the protection of all
persons, regardless of age and health.
The guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is
2 W/kg and the highest SAR value for this device when tested at
the ear was 0.850 W/kg*. As mobile devices offer a range of
functions, they can be used in other positions, such as on the body
as described in this user guide**. In this case, the highest tested
SAR value is 0.477 W/kg. As SAR is measured utilizing the devices
highest transmitting power the actual SAR of this device while
operating is typically below that indicated above. This is due to
automatic changes to the power level of the device to ensure it
only uses the minimum level required to reach the network.
FCC RF Exposure Information
European RF Exposure Information
706P_Eng.book Page xxiii Wednesday, February 28, 2007 12:45 PM