SmartSMS User Manual
Soft dB inc.
User Manual
p. 111
4. Output too high
This message warns the user that one of the channels is at maximum output level and
cannot drive the speaker to the requested target.
This problem can occur for many reasons: Basically, it is because there is not enough sound power
going into the room from the speakers, the suspended ceiling may be particularly hard or absorbent
(drywall, fiberglass over the tiles, etc.), the zone may have a very high number of speakers (more
than 32 speakers on 2 watts), the number of speakers may be too low for the size of the room or
the target may be too high. Try the following solutions:
•
Use higher power tap on the loudspeakers, if possible.
•
Reduce the target on that channel.
•
If you are using a SMS-CTL unit, raise the Gain on the external amplifier.
