深圳硕飞科技有限公司
SHENZHEN SOFI TECHNOLOGY
User's Guide
25
SP8 Seriel programmer
Buffer compile
The software contains a data buffer, used to save the data loaded from the file or read from the chip. The buffer
content can be examined and compiled.
Click [Compile] -> [Data Buffer] to open the dialog Buffer Compile, showed below:
1.
Buffer Compile toolbar contains "Set the position of the current cursor" (Position), Copy, Fill, AND/OR/XOR,
and exchange between up and low bytes.
2.
Set the format of data and address.
3.
Show the current status of buffer.
4.
Data display area in the buffer - Address column, set as display in decimal or hex.
5.
Data display area in the buffer - Area for hex display.
6.
Data display area in the buffer – area for ASCII Display.
Position
Set the cursor's address, and enter in the dialog that bumps out the address to arrive at, and click "Enter", as
showed below:
Attention: Address to be entered is hex.
