Soehnle 3710 STANDARD, Руководство пользователя

Страница: 24 / 120

www.soehnle-professional.com
24
This device has interference suppression in accordance with the related EC guideline
2014/30/EU. However, the display reading can be affected by extreme electrostatic or
electromagnetic interference, for example if a radio or mobile phone is used immediately
beside it. If affected in this way, the device should return to normal function once the
source of interference is removed. However, it may be necessary to switch off and on again.
If there is permanent electrostatic interference, please contact your service partner.
This device is a measuring instrument. Drafts, vibrations, rapid temperature changes and
direct exposure to sunlight may affect the weight readings.
The scales conform to protection class IP42.
Avoid high levels of air humidity, steam,
aggressive fluids and heavy soiling.
Improper installation will invalidate the warranty. The electrical connection conditions must
be consistent with the rating values printed on the power adapter. The equipment is
designed to be used indoors. Note the permitted ambient temperatures for operation (see
Technical Data). This equipment meets the requirements for electromagnetic compatibility.
Do not exceed the maximum values specified in the standards. If used correctly, there is no
danger of other equipment being affected by this product. If you have any problems, please
contact your Soehnle Professional service partner.
Warning: This equipment must not be modified without the manufacturer's permission. If
medical equipment is modified, suitable tests and inspections must be performed to ensure
that it can still be used safely.
4.5 Cleaning
Before cleaning, disconnect the equipment from the power supply by pulling out the mains
plug. The equipment should be cleaned only with a moistened cloth. In no circumstances
should water be allowed to penetrate the equipment.
4.6 Maintenance and service
Metrological inspection was carried out at the initial verification when the product was
manufactured. Other regular metrological controls (recalibrations) are to be carried out by
the competent weights and measures authorities according to the relevant national
regulations. Repairs and replacement of the power cable must be carried out only at a
centre authorised by Soehnle Professional, and using original parts.
The device should be undergo preventative inspections regularly (6 monthly intervals). The
scales are to be loaded with a known weight and the value displayed compared with the test
weight. In the event of any deviations maintenance or calibration must be carried out.
If the equipment is not functioning normally, it is probably because it has been damaged. In
this case, it must be returned to a service centre authorised by Soehnle Professional.