12
Installing the filter
Remove the filter cartridge from the plastic
wrapping.
Pull up the grey handle.
The filter housing will pop up.
Insert the filter cartridge into the filter
housing. Following the indications on the
direction of mounting, maintaining the
upward arrow.
Push and hold down the filter housing.
Press the handle until it locks in place.
Touch the NEXT screen button.
Installing the CO
2
bottle (only X1)
Screw the adapter on the CO
2
bottle (see
the bottle replacement instructions on
page 38).
Pull up the CO
2
handle.
Insert the CO
2
bottle into its cavity.
Install the adapter-bottle assembly by
rotating it a quarter turn clockwise.
Push the handle down until locks in place.
Touch the NEXT screen button to confirm
and continue.
Selecting the water supply source
mode
If the SODAX X1-X10 is to be fed by the
household water system, touch the faucet
icon.
If you chose to use the SODAX X1-X10 as
a standalone utilizing the dispenser's built
in water reservoir as the water supply
source, touch the jug icon.
Touch the CONFIRM screen button to
confirm your choice and continue.
NOTE:
You may change the dispenser's water
supply source anytime. See the
information regarding the "SETTINGS"
menu screen on page 19.