
1.
Place the PLAY™Drinks Maker
on a flat, sturdy surface, then
gently lay it down on its back with
the carbonating block facing
upwards.
2.
Remove seal and cap from the
SodaStream CO cylinder.
2
Remove the carbonating bottle
stored inside the PLAY™and then
insert the CO cylinder into the
2
opening of the cylinder hollow at
TM
the base of the PLAY Drinks
Maker and turn the CO cylinder
2
clockwise while applying gentle
pressure until it is firmly held in
place. Hand-tighten only; do not
use tools.
TM
If the PLAY Drinks Maker is not
laying on its back with the
c a r b o n a t i n g b l o c k f a c i n g
upwards, a safety gate will block
the cylinder hollow and you will
not be able to fully insert the
cylinder.
If using a 130L cylinder, remove
the cylinder adaptor collar by
pulling it out from the base of the
unit.
3.
Place your PLAY™Drinks Maker
back in the upright position.
You are ready to create the
bubbles.
INSTALL THE CO CYLINDER
2
Adaptor
Collar
7
Содержание PLAY Drinks Maker
