page
10
of 24
mod.
JUMBO 13
- man. rev. 00
Manual of SODASTREAM Professional SRL Unipersonale. No reproduction allowed without previous authorization by
the owner.
Cooler connection
Power mains connection
Warning
Before inserting the plug, make sure that the voltage and frequency
match those indicated on the identification plate and in the technical
specifications table
Warning
Make sure the main switch is off
Warning
Make sure the power cord does not represent an obstacle or a
danger to the passage of people
Warning
Make sure the power cord is not crushed or bent
Warning
Make sure the power cord does not come into contact with any type
of liquid, sharp or hot objects or corrosive substances
Warning
Do not wind the power cord
Warning
Connect the cooler to the socket using the supplied power cord
Connection to water mains
Warning
It is necessary to place a tap between the water mains and the
water inlet tube. Connect the cooler to drinkable cold water from the mains
only
Warning
It is necessary to place a non-return valve between the water inlet
tap and the first installed component
Warning
All water mains connections must be carried out by a qualified
plumber
It is advisable
to install a pressure reducer between the water mains tap
(after the water block, if installed, and before the filtration kit, if installed) and
the cooler.
Connect the water inlet tube inserting it into the dedicated water inlet fitting of the
cooler, then connect the tube to the water mains socket.
