background image

5

ENGLISHENGLISH

MASTERYS BC 

100-120 kVA - Ref.: IOMMASBCXX07-EN  05

1. SAFETY STANDARD

It is very dangerous to touch any part of the batteries as there is no insulation between the batteries and the mains 
power source.

The product you have chosen is designed for commercial and industrial use only. If used for particular critical applications such as 
life support systems, medical applications, commercial transportation, nuclear facilities or any other application or systems where 
product failure is likely to cause substantial harm to people or property, products may have to be adapted. For such use please 
contact SOCOMEC beforehand to check if these products meet the required levels of safety, performance, reliability, and comply 
with applicable laws, regulations and specifi cations.

WARNING!
This is a product for commercial and industrial application in the second environment - installation restrictions or 
additional measures may be needed to prevent disturbances.

1.2.  DESCRIPTION OF SYMBOLS ON LABELS ATTACHED TO THE UNIT

All precautions and warnings on labels and plates inside and outside the equipment should be observed.

 

DANGER! HIGH VOLTAGE (BLACK/YELLOW)

 GROUND 

TERMINAL

 

READ THE USER MANUAL BEFORE USING THE UNIT

Содержание Masterys BC





















































Отзывы: