12
EN
DATALOGGER H80-81 - 546 226 A - SOCOMEC
4.3. Declare devices
important prerequisite:
The configuration of the communication gateways and devices connected to DATALOG H80/H81 must be carried
out beforehand using the Easy Config software (see documentation DIRIS G, DIRIS, DIRIS Digiware & Easy Config).
Once DATALOG H80/H81 has been installed and connected as per the Quick Start instructions, the configuration
of DATALOG H80/H81 can then be carried out.
Hardware configuration with Easy
Config (IP + Modbus Addressing)
Configuration of DATALOG H80/81
Declaring devices in the "
Device
" tab allows the user to create, configure, and delete the communication gateways
and measuring devices that he wishes to manage in DATALOG H80/H81.
4 .3 .1 . Management of communication gateways
The home page of the "
Devices
" tab allows the user to view and manage all gateways seen by DATALOG H80/H81.
From this page, the user can:
• “
General
” tab: Change the name and the description of the general tree structure of the communication gateways
seen by DATALOG H80/H81
• “
IP gateways seen by the communication service
” tab: Manage all gateways (creation, deletion and modification
of associated settings such as the name, IP address and software port)
• Access the settings of each gateway from the list of devices on the left strip of the page
