13
EN
COUNTIS E05/E06 - 545867A - SOCOMEC
9. CONFIGURATION
The device can be configured directly from the COUNTIS E05 / E06 screen in programming mode or via the
communication link. The paragraphs below describe configuring using the screen.
9.1.
Onscreen configuration
From the screen, go to programming mode to change your communication settings. How to browse through the
programming mode is described in the following stages:
Function
Where
Buttons
Press
Switch pages within a menu
Every page within a menu
Realtime
Go to SETUP menu
Menu page SETUP
> 3 sec
Change a value/digit
SETUP pages
realtime
Confirm a value/digit
SETUP pages
> 3 sec
Exit SETUP menu
SAVE screen in the SETUP
menu
> 3 sec
Start/stop the displayed partial meter
Partial meter menu
> 3 sec
Reset the displayed partial meter to zero
Partial meter menu
> 3 sec
