ATyS t M - 542931D - SOCOMEC
5
EN
2. INTRODUCTION
ATyS t M “Automatic Transfer Switching Equipment” (ATSE) is designed for use in power systems for the safe transfer of
a load supply between a normal and an alternate source . The changeover is done in open transition and with minimum
supply interruption during transfer ensuring full compliance with IEC 60947-6-1, GB 14048-11 and other international TSE
standards as listed .
The ATyS t M is a full load break (switch type) derived transfer switching equipment where the main components are
proven technology devices also fulfilling requirements in IEC 60947-3 standards.
As a Class PC ATSE, the ATyS t M is capable of “making and withstanding short circuit currents” assigned to IEC 60947-3
utilization categories of up to AC23A, GB 14048-11, IEC 60947-6-1 and equivalent standards with utilization categories of
up to AC33B .
ATyS t M transfer switches ensure:
• Power Control and Safety between a normal and an alternate source .
• A complete product delivered as a fully assembled and tested solution .
• Intuitive HMI for emergency / local operation .
• Integrated and robust switch disconnection .
• Window with clearly visible position indication I – 0 - II .
• An inherent failsafe mechanical interlock .
• Stable positions (I – 0 – II) non affected by typical vibration and shocks .
• Constant pressure on the contacts non affected by network voltage .
•
Energy Efficient with virtually no consumption whilst on the normal, alternate or off positions.
•
Extremely rugged, error free and built in padlocking facility (configurable).
• Straight forward installation with effective ergonomics .
• Simple motorization control interface .
•
ATS configuration through 4 potentiometers and DIP switches.
• Auxiliary contacts for switch positions I – 0 - II (optional) .
• “Product availability” output .
•
Ample accessories to suit specific requirements.
•
Fully integrated ATS controller specifically designed for Mains / Mains and Mains / Genset applications.
2.1. The ATyS family product range
Just the right ATyS for your application…
ATyS: Small Footprint
ATyS M: Modular Profile
Back to Back
Configuration
125A - 3200A
40A - 160A
40A - 125A
ATyS p
Power / Genset
Management
ATyS p M
Evolved Genset
Management
ATyS g
Simple Genset
Management
ATyS g M
Simple Genset
Management
ATyS t
Transformer
Management
ATyS t M
Transformer (building)
Management
ATyS d S
Small Genset
with DPS
ATyS d
RTSE (DPS)
ATyS d M
RTSE (DPS)
S
ide by Side Configuration
ATyS S
(RTSE)
Small Gense
ATyS r
RTSE
(1)
ATyS
RTSE
(1)
The UL version of ATyS r is available from 100 - 400A
