socomec ATyS FT, Инструкция по установке и эксплуатации

Страница: 48 / 78

ATyS FT - 549867A - SOCOMEC
48 EN
8. MAINTENANCE
WARNING ! Maintenance on the product and any other associated equipment including but not limited to
servicing operations must be performed by adequately trained and qualified personnel.
8.1. Mechanical manual operations for maintenance purposes
WARNING ! More than one live circuit! Disconnect
all
sources of supply before servicing and/or using the
manual operation.
To access the manual handle unscrew the plastic cover, this will inhibit the supply of voltage to the coil, so both
automatic and remote operations will not be available as long as this cover is not screwed back .
Pushbacktheplasticcoveruntilitisclearlyfixedinplace,forcontactinspection,thearcchutewillbemaintainedintheopen
position if the switch is mounted vertically in the enclosure.
- User then have access to two types of handles (see following image for illustration of both handles):
- Using Standard operation handle (marked “FAST OPERATION” on the image below) which will operate contacts
at the same speed as they would normally operate using electrical operation, independently of the speed used to
operate the handle.