socomec ATyS FT, Инструкция по установке и эксплуатации

Страница: 45 / 78

ATyS FT - 549867A - SOCOMEC
45 EN
Step 6 is about the installation parameters.
Application type stands for the type of sources coming to the controller. The options are:
• Main-Genset (by default): Power supply coming from a transformer on the priority source and from a Genset on the non-
priority source.
• Main-Main: Power supply coming from a transformer for both sources 1 and 2.
• Genset-Genset: Power supply coming from a diesel generator for both sources 1 and 2.
Source priority stands for the preferred source in automatic mode when both sources are fully available.
The options are:
• Source 1: the source connected to source 1 sensing on the switch will become the preferred source and the transfer
switch will automatically transfer to this source as long as it is available and the timers are respected.
• Source 2: the source connected to source 2 sensing on the switch will become the preferred source and the transfer
switch will automatically transfer to this source as long as it is available and the timers are respected.
Important: Switch technology must be set to “ATyS FT”.
The 7th step is not affecting the functioning of the transfer switch but permits the user to select a name for the product. As
default, it’s ATyS C66, but it can be changed for any combination of letters, numbers and signs, for instance, “Cooling”, “Line
1” or “DTC/21”.
Tofinalizetheconfiguration,thewizardasksforthecommunicationparameters,suchastheslaveaddress(bydefault6)and
the communication parameters: