SocketMobile CHS 7Xi, Быстрый старт

Страница: 9 / 15

automatic reconnections
after you power on the cHs, it will automatically try to connect to
the last device it was connected to.
• make sure the device is in range with Bluetooth on.
• If using HId mode, pressing the trigger button will enforce the con-
nection.
• If using ios mode, make sure the scanner-enabled application is
active.
While the cHs is attempting to connect the Blue Led will blink every
second.
• If a connection is made, the Blue LED will blink every 3 seconds.
• If a connection is not made after 30 tries, the CHS will emit a long
beep.
m
ob
ile
Scan command barcode(s) to quickly configure the CHS.
make sure the cHs is not connected to a device before scanning a
command barcode!
for a complete set of command barcodes, download the command
Barcodes sheet: www.socketmobile.com/pdf/data-collection/
command-barcodes-sheet_7X.pdf
this web link is also provided in the below Qr code.
command Barcodes
17
BLuetootH connectIon
16