SocketMobile CHS 7Xi, Быстрый старт

Страница: 6 / 15

HId (keyBoard emuLatIon) mode HId (keyBoard emuLatIon) mode (contInued)
10
to pair the cHS with the apple device in Hid mode: (required only the
first time you connect).
1. Power on the cHs. the Blue Led should blink every second indicating
Bluetooth is on but not connected.
2. turn Bluetooth on for the apple device. go to settings > Bluetooth.
a Bluetooth devices search will begin.
an ios device is always discoverable when in the Bluetooth
menu is active. a mac os device provides an option to turn
Discoverable On or Off. Confirm the MAC OS device is Discover -
able.
3. tap socket 7Xi [xxxxxx] in the list of devices found. after a few sec-
onds the “not Paired” status will change to “connected” and the cHs
Blue LED will blink every 3 seconds indicating it is Connected.
the characters in brackets are the last 6 characters of the
Bluetooth address. the full Bluetooth address is printed in the
Product label (remove the battery door).
you are now ready to scan barcodes, see instructions on page 7.
11
keyboard Pop-up enable
the cHs emulates the keyboard in HId mode. so scanned barcode data
will be input into the text field. The following steps show how to access
the onscreen keyboard while connected to the cHs in HId mode.
1. make sure the cHs is connected to your apple device in HId mode.
2. open your application and place the cursor where you want to enter
data.
3. Quickly double-press the power button of the cHs (like
doubleclicking a mouse) to open or close the onscreen keyboard. the
CHS will beep once as confirmation.
To connect to a new Apple device, you must first unpair the CHS
and remove the cHs from the Bluetooth list in your device. see
page 15.