Peer-to-Peer (Ad-hoc) Workgroup
The Peer-to-Peer workgroup configuration enables you to
quickly set up a small wireless workgroup, where the workgroup
participants can exchange files using features like “Files and
Printer Sharing” as supported by Microsoft
®
Networking.
You can use this option to setup a temporary or Ad-hoc network
in environments where no access points are available (for
example in Small Office/Home Office “SOHO” environments).
As long as the stations are within range of one another, this is
the easiest and least expensive way to set up a wireless network.
Home Networking
With WL6207, wireless access to the Internet or other devices is
at your fingertips. All you need to do is connect the SDIO Wireless LAN Card to an existing access point
that may be connected to the external Cable TV or xDSL modems and you are ready to:
Share files and printers, and
Access the Internet.
2-2-3 Enterprise Networking
With the Wi-Fi certified Access Point in the corporate network
system, you can connect to a corporate Local Area Network (LAN)
infrastructure to have wireless
access to all network facilities. LAN Infrastructures may either be:
Stand-alone wireless LANs.
Wireless network infrastructures connected to an existing
Ethernet network.
About the WL6207 CD-ROM
The WL6207 CD-ROM contains both software and documentation
for the WL6207 card.
INSTALLING THE DRIVER
Installation of the WL6207 Driver to the Pocket PC using
Microsoft Active Sync
®
1.
Connect your PDA to your computer and make sure Active-Sync® has established for a connection
between the two devices.
2.
Insert the CD ROM to your PC. The following screen will apeear, click
Install Driver
to start driver
installation. After driver installation is complete, clik
Install Utility
to start utility installation.
Note: Do not insert the WL6207 into the card slot of your PDA until the Install Driver (Step 1)
and Install Utility (Step 2) have been performed.
5
