4
1 | Parameter Support
Socket barcode scanners are built with different scanning engines, which give them different
scanning capabilities.
How to Use this Programming Guide
1.
Look at the barcode label on the back of your product and/or package to determine the
product’s Revision (Rev) letter. The Rev letter is the letter after the part number (P/N), which
appears in the format 85xx-xxxx.
2.
Check Table A on the next page to see if the Rev letter of your product falls within the range
listed.
3.
If your product Rev letter falls within the range listed in the table, then make a note of which
scanning engine your product has (i.e., SE-955, CES-600 or EA15).
If your product has a Rev letter previous to the one listed in the table, then do not use this
guide. Please contact Socket technical support at
http://support.socketmobile.com
for the
correct document.
4.
Refer to Table B on page 6 to determine whether the scanning engine in your product supports
the symbologies you want.
5.
Turn to Chapter 2 or Chapter 3, depending on which scanning engine you have, to find
barcodes and/or serial commands for programming your device.
The Rev Letter in this
example is “A”
