Laser On Time
Parameter # 0x88
This parameter sets the maximum time decode processing continues during a scan
attempt. It is programmable in 0.1 second increments from 0.5 to 9.9 seconds.
To set a Laser On Time, scan the bar code below. Next scan two numeric bar codes
beginning on
page
82
that correspond to the desired on time. Single digit numbers must
have a leading zero. For example, to set an on time of 0.5 seconds, scan the bar code
below, then scan the “0” and “5” bar codes. To change the selection or cancel an
incorrect entry, scan the
Cancel
bar code on
page
84
.
Laser On Time
(Default: 3.0 sec.)
