BIOS Setup
4 5
PnP/PCI Configurations
Figure 7: PnP/PCI Configurations
Reset Configuration Data
Disabled
Disabled this function. (Default value)
Enabled
Enable clear PnP information in ESCD.
Resources Controlled by
Manual
User can set the PnP resource (I/O Address, IRQ & DMA
channels) used by legacy ISA DEVICE.
Auto(ESCD)
BIOS automatically use these PnP rescuers. (Default value)
IRQ Resources ( 3,4,5,7,9,10,11,12,14,15 )
PCI/ISA PnP
The resource is used by PCI device.
Legacy ISA
Set the resource to reserved.
CMOS Setup Utility-Copyright (C) 1984-2001 Award Software
PnP/PCI Configurations
Reset Configuration Data
Disabled
Item Help
Menu Level
Resources Controlled By
Auto (ESCD)
IRQ Resources
Press Enter
DMA Resources
Press Enter
PCI1 IRQ Assignment
Auto
PCI2 IRQ Assignment
Auto
PCI3 IRQ Assignment
Auto
: Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults