Socket CHS 8Ci, Быстрый старт

Страница: 8 / 28

BLUETOOTH BASICS
Pair and Connect
When Bluetooth is activated on your device and the CHS is in
discoverable mode, Bluetooth pairing will begin. When the two devices
recognize each other, they can pair.
Once the devices have paired, it is necessary to connect. (Follow the
instructions in the following pages to connect the CHS to your device.)
Once the devices have connected, they will automatically recognize
each other whenever they are within range, and it will not be
necessary to connect again.
If the CHS is connected to a device and gets disconnected, it will try to
reconnect. Make sure the computer or device is on and in range. If the
CHS cannot reconnect, it will beep long. Power off then on again to
reconnect.
To unpair from the last connected host, press and hold the trigger
button while turning off the scanner.
8